The language of software will be changed depend on your device's language settings. (below screen shot for android tablet)
Tips for free softwares:
OBD Gauge for PalmOS and Pocket PC by Dana Peters
OBD Logger by Jonathan Senkerik
OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 – local copy)
OBD2 Scantool by Ivan Andrewjeski
OBDII for ELM322 by David Huffman
pyOBD by Donour Sizemore for MacOSX and Linux
RDDTC by Pete Calinski
Real Scan by Brent Harris
ScanTest for Pocket PC by Ivan Ganev aka a-ser
wOBD by WDT
With our ELM327 (EML327), you will be able to perform a complete computer diagnostics of your car and even to correct minor faults without resorting to service stations.
Our scan tool is a high-quality automotive scanning tool, supports all OBD-II Protocols
FAQ Before Orders (Please kindly read before)
Q1: Is your ELM327 1.5 built on original Microchip PIC18F25K80?
A1: NX101 is version 1.5 built on ARM chip;
NX101 Pro is version 1.5 built on original Microchip PIC18F25K80.
Q2:What's the frequency of crystal oscillator there, 4mhz or 16mhz?
A2: NX101 Pro is 4mhz.
Q3:Does it support command ATAL and ATPPS ?
A3: NX101 Pro support command ATAL and ATPPS.
Q4: What is the version of the ELM327? Difference between NX101 Pro and NX101 ?
A4:These are the real V1.5 High Quality version, Support all OBD2 Vehicles.
NX101 Pro is original version with high quality chip set PIC18F25K80, and using 2 PCB Board, works for almost all cars from 2006; NX101is new solution for elm327 v1.5 with more affordable price, but lacking of 2 attps commands, works for almost all cars after 2010.
Q5: What is difference between V1.5 and V2.1 ? and How can I check it ?
A5: Our newest ELM327 is 100% V1.5, which is support full protocols version(10 protocols), especially J1850 & J1939 Protocols for Japanese Cars and American Cars, other elm327 only 7 or 9 protocols.
After you receive our ELM327, you can run it on any apps, if it's not V1.5 Hardware version, 100% full refund.
Q6: Does this OBD 2 Autoscannersupport the diesel cars or trucks ? Is this working with IOS?
A6: ELM327 does not support the diesel vehicles or trucks, and this ELM327 is bluetooth version for android system cellphones.
Q7: Does your ELM327 Come with any softwares?
A7: Yes, for all the software we have uploaded to cloud already, you will receive one step by step user guides(in english and russian) including QR code (scan it via aliexpress app) and download link. Software for PC and for Android cell-phones are both available. You may download the program first directly by scanning our QR code as below picture shows,
You may also search “Torque” or “ELM327” on android Play store to download.
The language of software will be changed depend on your device's language settings.
(below screen shot for android tablet)
*If you meet the CD broken case due to long distance shipping, please contact us, we will send you a link for download.
Q8: How do i know if my car is working with the ELM327 or not ?
A8: This ELM327 bluetooth adapter is working for all OBD-II Compliant vehicles.
The OBDII compliant vehicles referernce as below:
1996 or newer model year vehicle made in the United States
Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep
2004 or newer model year vehicle made in the European Union
Fit for Alfa Romeo, Fit for SAAB, Fit for Acura, Fit for Opel, Fit for Audi, Fit for Seat, Fit for Peugeot ,Fit for Renault after 2009 year, doesn't support Clio 2
Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover
Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar
2008 or newer model year vehicle made in the Asian Union
Fit for KIA , Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda
Fit for Nissan, Fit for Subaru , Fit for Suzuki, Fit for Toyota.
For Lada/ VAZ/ UAZ car makes, please don't purchase If your car is before 2011.
For Ssangyong car makes, please don't purchase If your car is before 2008.
For Renault Dacia Logan car model, please don't purchase If your car is before 2009.
Please be kindly awared that, if your car is locally assembled in Russia, it will only work after 2008.
For Electric car and Hybrid car did not support ,like Nissan leaf and so on !
You may also pop the hood and look for a sticker named “VEHICLE EMISSION CONTORL INFORMATION”
NOTE: Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is spercial design, so it may not compatible with some cars which do not support OBD2 protocol. If you're not sure, ask us anytime!
ELM327 V1.5 OBD 2 Autoscanner Function List
1.Read diagnostic trouble codes, both generic and manufacturer specific
2.Clear trouble codes and turn off the MIL (“Check Engine” light)
3.Display current sensor data, including:
5.Calculated Load Value
7.Fuel System Status
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
13.Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17.Fuel System status
With our ELM327, you will be able to perform a complete computer diagnostics of your car and even to correct minor faults without resorting to auto service stations.
Delivery time Note: If your Confirmation Time is coming, you still not receive the goods, please contact us, we will extend the delivery date in advance.
No Dispute please: Please do not apply dispute within 60 days, let's keep good business relationship. Thanks for your kind understanding.
Step by step guideilnes for ELM327 with ON/OFF Switch
1. Locate your OBDII Diagnostic Port. If your car does't have OBDII 16pin Port, you can check the pins on your diagnositc port, we will help you find the connector the convert it to 16pin.
2. Download the Torque APP from android market or install it from our CD.
3. Plug the ELM327 into your car, and it will emit the bluetooth signal, connect it with your cell-phone. Password is “1234”.
4. Open the TORQUE Software, go to”Adapter status” — “Settings” on top right,
select “OBD2 Adapter settings” ;
Choose “Connection settings” as “Bluetooth” ;
Choose “Bluetooth settings” as “OBDII” ;
EXIT the APP TORQUE
Restart the TORQUE App, You will see the green light blinking, and wait for a while it will build up the communication.
5. Please be noticed that the ON/OFF Button is for waking up the device, our ELM327 is humanized and high quality v1.5 version, it will go to auto-sleep mode if communication is suspend over 30 mins. Press the button whenever you need to use it.
If you still have any doubts, please don't hesitate to contat us!
Softwares Display on PC
ELM327 V1.5 OBD OBD 2 Autoscanner
1* manual with softwares for PC & android
Safe packing for all AutoTops Packages
Below are FAQ related to using questions
Q. What's the Password of the Bluetooth?
A: It's “1234”
Q: Which android system phone can compatible? If it can compatible with Iphone?
A: Please kindly use Android V4.4 and high version, The Iphone can't be supported
Q:Why my phone can't connect with the Bluetooth?
A: Please kindly check if you choose the bluetooth connect way in software setting. and EXIT the software after setting is finished, then restart the software, it will automatically connect to the adapter and car ecu.
1. This is High-Quality USB ELM327 version, work on PC , Different with other chip ELM327 USB, It is using the ELM327 Processor, and original FTDI FT232RL Chip, builted with tough structure.
2. Our scanner is working for OBDII Compliant vehicles, real v1.5 version, supports J1850 Protocols.