High Quality DC 100V 10A Voltmeter Ammeter Blue + Red LED Amp Dual Digital Volt Meter Gauge
$27.95 – $28.15
1. The two logistics of Yanwen Economic Air Mail and China Post Ordinary Small Packet Plus do not have tracking information, so there is no time limit. We recommend using China Post Registered Air Mail or AliExpress Standard Shipping.
2. We do not accept refunds for minor damage (pin bending, slight screen abrasion,etc.)during the transit of the material, without affecting normal use. If you mind,please do not buy.
3. Some products provide technical support, if you need help, please contact us, we will handle your message the first time.
4. If you have any questions about the product, please contact us before you open a dispute. We will give you the most satisfactory answer.
5. We provide each customer with good quality products, very favorable prices and the most sincere service. We hope to get your good feedback.
Wish you a pleasant shopping!
- Working voltage:4.5-30V DC
- Note: The maximum input voltage can not exceed 30V, otherwise there is the danger of burning
- Working current:≤20mA
- Display: 0.28″ Two color blue and red
- Measuring range: DC 0-100V 0-10A
- Minimum resolution (V): 0.1V
- Refresh rate: ≥100mS / times
- Measure accuracy: 1% (± 1 digit)
- Minimum resolution (A): 0.01A
- Operating temperature: -15 to 70° c
- Working pressure: 80 to 106 kPa
- size :48×29×21 mm
- 1, the voltmeter wiring is simple, only need to pick two lines, the table reversal protection, reverse does not burn.
- 2, the voltmeter start voltage is low, the red just 2.5V, just 2.7V Green, the blue just 3.0V will be able to measure correctly, start with the price of two-wire voltmeter voltage is the lowest anywhere in the world. This will greatly facilitate the use of the lithium battery, 18650 battery users. When the voltage is lower than 3.5V, the display brightness diminishes, but does not affect the correct measurement.
- 3, in order to achieve optimum measurement accuracy, the voltmeter will be different according to the measured voltage automatically move the decimal point position. Measure the voltage below 10V, displayed after the decimal point two; 10V voltage measurements displayed after the decimal point one. That is able to take care of the battery user needs, but also cater to the needs of the higher voltage measurement on the measurement accuracy.
- 4, the voltmeter can be used for motorcycles, cars and other monitoring battery voltage, timely grasp battery status. Other voltages can also be used for measurement purposes.