ELM 327 V1.5 PIC18F25K80 For FORScan ELM327 USB For Windows HS CAN/MS CAN Switch For Ford CH340 OBD2 Car diagnostic tool Scanner
1.HS MS USB V1.5: ELM327 USB V1.5 version With PIC18F25K80 chip,CH340 chip,and HS-CAN/M-S CAN Switch(with CD)
（Many customers use HS-COM/MS-COM V1.5 ELM327 for Ford with FORScan）
2.V1.1 USB:High Quality ELM327 USB V1.1 version with PIC18F25K80 chip,FTDI FT232(No CD)
3.V1.5 Normal USB:ELM327 USB V1.5 version with PIC18F25K80 chip(No CD)
4.Brake Fluid Tester: Test DOT3/DOT4/DOT5 Brake Fluid(No battery)
HS MS USB V1.5:
Description for ELM327 USB Diagnostic Cable With Switch
Top 4 Reasons to Get Plastic USB ELM327:
1: Latest ELM327 includes PIC25K80 and CH340T.
2: Manufactured modification to include a switch to connect to different CAN buses, MS CAN bus and HS CAN bus.
3: Designed for FORScan software, compatible with software venders; for FORScan, for Elmconfig, for FF2 and for FoCCCus, plus more.
4: Support Windows XP and WIN7 32bite.
SAE J1850 PWM (41.6Kbaud)
SAE J1850 VPW (10.4Kbaud)
ISO9141-2 (5 baud init, 10.4Kbaud)
ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
ISO14230-4 KWP (fast init, 10.4 Kbaud)
ISO15765-4 CAN (11bit ID, 500 Kbaud)
ISO15765-4 CAN (29bit ID, 500 Kbaud)
ISO15765-4 CAN (11bit ID, 250 Kbaud)
ISO15765-4 CAN (29bit ID, 250 Kbaud)
SAE J1939 CAN (29bit ID, 250*Kbaud)
CAN (11*bit ID, 125*Kbaud)
CAN (11*bit ID, 50*Kbaud)
With the cable and the one of the supported software vendors you can detected modules which are not visible for regular
OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327
Reset fault /trouble codes / parameter ids (PIDs)
Change car configuration data
Program certain models
Switch position one: HS CAN – Occupies pins 6 and 14
Switch position two: MS CAN – Occupies pins 3 and 11
Please note that many models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.
ELM327 supports HS CAN from the stock, because for HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.